Furuno FR-2115-B installation manual Rotor Voltage between R1 & R2 Stator Voltage between S1 & S2

Setting method 1: DIP switch settings and gyrocompass specifications

1) Gyrocompass type

Gyrocompass	SW	SW	SW	JP1
type	1-4	1-5	1-6
AC	OFF	OFF	OFF	#1, #2,
synchronous				#3
DC	OFF	OFF	OFF	#2, #3,
synchronous				#4
DC step	ON	OFF	OFF	#4, #5,
				#6
Full-wave	OFF	ON	0FF	#4, #5,
pulsating current				#6
Half-wave	ON,	ON	OFF	#4, #5,
pulsating current				#6

2) Frequency

Frequency	SW	SW	Remarks
	1-7	1-8
50/60 Hz	OFF	OFF	AC synchronous
			pulsating current
400 Hz	ON	OFF	AC synchronous
			pulsating current
500 Hz	OFF	ON	AC synchronous
			pulsating current
DC	ON	ON	DC synchronous
			DC step

3) Rotor Voltage (between R1 & R2) 4) Stator Voltage (between S1 & S2)

Rotor Voltage	SW	JP3
	2-1
20 to 45 VAC	ON	#2
30 to 70 VAC	OFF	#2

Stator	SW	SW	JP2
Voltage	2-2	2-3
20 to 45 VAC, or	OFF	OFF	#2
20 to 60 VDC
30 to 70 VAC, or	ON	OFF	#2
40 to 100 VDC

40 to 90 VAC	ON	#1
60 to 135 VAC	OFF	#1

40 to 90 VAC	OFF	ON	#1
60 to 135 VAC	ON	ON	#1

5) Ratio

Ratio	SW	SW	SW
	1-1	1-2	1-3
360X	OFF	OFF	OFF

6) Supply Voltage

Stator	SW	SW	JP2
Voltage	2-2	2-3
20 to 45 VAC, or	OFF	OFF	#2
20 to 60 VDC

180X	ON	OFF	OFF
90X	OFF	ON	OFF
36X	OFF	ON	OFF

30 to 70 VAC, or	ON	OFF	#2
40 to 100 VDC
40 to 90 VAC	OFF	ON	#1
60 to 135 VAC	ON	ON	#1

7) AD-10 format data Tx interval

Select data transmitting interval for ports 1 to 6 with jumper wires JP6 and JP7. The Tx interval is available in 25 ms or 200 ms. 25 ms is for radar: 200 ms is for all other equipment.

8) NMEA interval

Tx Interval	SW2-4
2 seconds	ON
1second	OFF

4-4