Scanning and Monitoring, Code ﬁeld is | Garmin Rino 120 guide

Scanning and Monitoring

The Scan option allows you to scan through the available channels for voice activity. As the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning. When the Rino 120 is scanning and it receives an incoming signal, the Rino 120 automatically decodes the Squelch Code used by the incoming signal. The Rino 120 then uses that Squelch Code when it transmits back to that unit.

The Code ﬁeld is

blank when the unit is scanning or monitoring channels.

You may use the Set Scanlist option to pick which channels/squelch codes to scan. Scanning through the all the channels can take time: Selecting only speciﬁc channels/squelch codes decreases the scan time and

UNIT OPERATION > RADIO PAGE

helps prevent the chances of missing a transmission. The Scanlist also has Option Menu choices to Scan Current Codes or Scan All Codes. Choosing Scan Current Codes scans only the Channel and Squelch Code combinations in memory.

The Monitor option lets you listen to a single channel for any activity, including static and weak voice signals. The Rino series automatically squelches a frequency to ﬁlter out unwanted noise. Using the Monitor option temporarily turns off the automatic squelch, allowing you to hear all activity on channel.

If you see a broken transmission symbol (), there is activity on your selected channel, but the incoming signal does not match the Squelch Code your unit is using.

Rino® 120 Owner’s Manual

13

Image 19

Garmin Rino 120 owner manual Scanning and Monitoring, Code ﬁeld is

Contents

Way radio & personal navigator Olathe, Kansas 66062, U.S.A Abbey Park Industrial Estate Introduction Initializing the Rino Using My ID and Symbol Fields Data ﬁeld options for Route 110 Getting to Know Your Rino Speaker LCD Display Thumb Stick Front of the Rino Back of the Rino Main Page Sequence To lock/unlock the keys Operating the RinoTo use the Thumb Stick To use the page Option Menu Status Bar Overview Understanding GPS Initializing the Rino RadioTo initialize the unit acquire satellites To enter a name Using My ID and Symbol Fields Changing the user symbol To change the user symbol Setting the Channel and Squelch Code To change the Channel and/or Squelch Code Code ﬁeld is Scanning and Monitoring To scan or monitor a channels To setup a Scanlist Radio Page Option Menu Setup Radio Unit Operation Radio Setup Scanlist Setup TonesTurn Radio/GPS On/Off GPS Status Informational PictureRadio Transmission Status Mark Waypoint’s Indicators New Contact Page Overview Peer-to-Peer PositioningTo transmit your location to other Rino users To accept a new contact To change contact details To review a contact and contact detailsTo view a contact on the Map To send a location Sending a Location Map To change scales on the Map To view a Contact from the Map Map Page Option Menu Map Page Options To ﬁnd an item near the map pointer Using the Pan Map Option To program a data ﬁeld Programming the Data FieldsData Field Options To use Map Setup options Setting up the Map Tracks Setup General SetupMap Features Setup To use the Measure Distance option Text SetupMap Data Setup Measuring Distance Navigation Using the Navigation To stop navigating To change data ﬁelds Navigation Page Options Trip Computer Page Options Trip Computer Main Menu Using the Main Menu Alarm Clock-Provides a settable 24-hour alarm clock Main Menu Options Sequence SetupTo move, insert, or remove a Main Shortcuts Menu To change Mark Waypoint Page Options WaypointsMark Waypoint To mark your current location and open the Mark Waypoint To create a waypoint using the panning arrow To create a waypoint for a map featureCreating Waypoints To edit a waypoint Projecting a WaypointEditing a Waypoint To project a waypoint To move a waypoint by dragging it To delete a waypoint or contactTo save Map or Find ‘N Go items as waypoints Find ‘N Go To access the Find ‘N Go Menu To ﬁnd a waypoint near your current location Finding a Waypoint Entering a waypoint name to ﬁnd By Name To ﬁnd a waypoint by name To ﬁnd a contact Finding a Contact To ﬁnd a city Finding a City To ﬁnd an exit Finding an Exit Shopping Finding a Point of Interest Nearest Food & Drink To ﬁnd a point of interest To locate an address Finding an Address or Intersection To locate an intersection To ﬁnd a Last Found Place Finding a Last Found Place To send a saved note Sending a NoteTo send a new note To activate a Goto Using a Goto Route Creating and Using a RouteTo create a route To reverse the route Editing a RouteTo add a Find ‘N Go Menu item to a route To remove all waypoints To review a route point To restore default settings for the routeTo copy the route To delete the route To change a route point To remove a point from the route listTo move a route point To add a point at either end of a route Adding or Editing from the Route MapTo add a route point within a route To review or remove a route point Navigating a RouteTo navigate a route Data ﬁeld options for Route Stopping NavigationData Fields for the Route To select data ﬁeld options To open the Tracks TracksTo save and use a Track Using the TracBack Feature To use the TracBack feature Setting up the Track LogTo use Track Log Setup options To add a proximity point To access the ProximityTo turn proximity alarms on or off Proximity Satellite To access the SatelliteSky View graphic Satellite Strength Waas To select the Use With GPS Off option Satellite Page Options To enter a new location To select Track Up or North Up To access the Time Setup Setup PagesTime Setup To access the Setup Menu To access the Units Setup Units SetupTo set the time Loran TD Format Display Setup To access the Heading Setup Heading SetupTo access the Display Setup To adjust the contrast To access the Interface Setup Interface SetupTo select either option To select a serial data format None-Provides no interfacing capabilities To access the System Setup System SetupTo change the battery type To use the current month and year To access the CalendarCalendar To change the month and year To delete notes by week To edit or delete a noteTo view information for a date To turn the alarm clock On/Off Alarm ClockTo access the Alarm Clock To set an alarm clock time Calculator To access the CalculatorTo change calculator options To use the Stopwatch To access the StopwatchStopwatch Stopwatch Lap Options To set the location To access the Sun & MoonSun & Moon To view information for a different date and time Hunt & Fish To access the Hunt & FishTo view information for a different date To review the area of a saved track To access the Area CalculatorArea Calculator To calculate the area Games To adjust the Grid Size or Square SizeMemory Race Waypoint Bomber Assimilation ClotheslineBeast Hunt Physical SpeciﬁcationsPerformance Radio Power Accessories Transferring MapSource Data To setup for data transfer FRS Features What is FRS? Gmrs FRS Limitations Symptom Probable Cause Remedy GPS Troubleshooting Guide Symbol Probable Cause Remedy Radio Troubleshooting Guide Channel Description FRS Frequency Chart Gmrs Frequency Chart Code Frequency Ctcss Frequency Chart Data Field Deﬁnitions 104 Garmin Proprietary Sentences Interface Information FCC Compliance Information FCC Licensing Information Limited Warranty 109 Product Registration Software License AgreementContact Garmin Important Read this Information Before Using Your Rino 112 113 Also Gmrs Gmrs 1, 8, 11, 16, 96 Gmrs Repeater Channels Symbols 115 116