
System Setup Page
The System Setup Page allows you to change GPS operation modes, use the WAAS capabilities, turn the Message Beep on or off, and choose the battery type. See the “Appendix” for WAAS capability information.
To access the System Setup Page:
1. Press the Page key or the Menu icon to open the Main Menu.
2.In the Main Menu, scroll down and select Setup.
3. Select the System icon to System Setup Page open the System
Setup Page.
The Option Menu allows you restore defaults or display the current version of unit operating software and the Unit I.D. Number. Software updates and instructions for downloading are available from the Garmin Web site (www.garmin.com).
UNIT OPERATION > SETUP PAGES
Choose one of the four GPS options other than Normal to significantly save battery power. The Battery Saver mode reduces the rate of satellite signal position updating and the GPS Off option stops satellite signal reception altogether. The Demo Mode simulates navigation.
To change the battery type:
1.Use the Thumb Stick to highlight the Battery Type field and then press In.
2.Then use the Thumb Stick to select the desired option and press In.
Rino® 120 Owner’s Manual | 79 |