Operating the Rino 120

For best results, you should initialize the GPS receiver in your Rino 120 unit before you use it the first time. Refer to the “Initializing the Rino 120” section later in this manual for instructions on initializing the unit.

The Rino 120 is programmed to provide “pop-up” messages concerning operational characteristics and conditions. Press the Thumb Stick In to acknowledge a message and return to the current feature.

To use the Thumb Stick:

Press In to enter highlighted options and to confirm messages

Move Up, Down, Right or Left to move through lists, highlight fields, on-screen buttons, icons, enter data, or move the map panning arrow

Press In and hold to display the Shortcuts Menu.

To use the page Option Menu:

1.Highlight the Option Menu on-screen button at the top of the display screen and then press the Thumb Stick In to open the menu.

GETTING STARTED > OPERATING THE RINO 120

2.Highlight the desired menu option and press the Thumb Stick In to activate the option.

3.To close without making a selection, move the Thumb Stick to the Right.

To lock/unlock the keys:

1.Press and hold the Thumb Stick In to access the Shortcuts Menu. Highlight Enable Keylock and press the Thumb Stick In. The Talk key is now locked.

2.To unlock, press and hold the Page key until “Keylock Disabled” is displayed (about 5 seconds).

Keylock Pop-up Message

Rino® 120 Owner’s Manual

5

Page 11
Image 11
Garmin Rino 120 Operating the Rino, To use the Thumb Stick, To use the page Option Menu, To lock/unlock the keys