The Rino 120 can manage up to 50 contacts at any time. Each time you receive a signal from a contact, your map is updated showing their new position. A Track Log
of their movement is created and shown on your map (see the “Track Logs” section). After a contact has been established, a “<contact name> Updated” message briefly appears at the bottom of your display each time the contact updates.
All contacts are listed on the Contact List Page and also displayed in the Contact Bar on the Map Page (see the “Map Page” section). Contacts behave like waypoints and count towards the 500 maximum waypoint total. If the contact did not have a GPS location on the last transmission, a ? (question mark) appears below the flag. To view the contact details (such as Direction, Elevation, Timestamp, Location, and Notes that have up to 30 characters), highlight the details field and press Left or Right on the Thumb Stick to change to the next data field.
UNIT OPERATION > USING THE RINO 120 RADIO FEATURES
Press Left or Right on the Thumb
Stick to view different contact data.
To accept a new contact:
1.When a new contact is received, the New Contact Page automatically appears.
2.Highlight OK and press the Thumb Stick In. If you do not select OK, the contact is not saved.
Rino® 120 Owner’s Manual | 21 |
