WAAS

The Wide Area Augmentation System (WAAS) capability produces a more accurate position fix. When enabled (GPS set to Normal and WAAS set to Enabled through the System Setup Page; also the interface must be set to something other than RTCM mode), this feature searches for WAAS satellites near your location and then receives data for correcting differentials in the GPS satellite signals. WAAS satellite numbers begin at number 33

or above and are displayed on the Satellite Page. When differential correction data has been received for GPS satellites (numbers 32 or below), a D displays in the signal bar. It is helpful to orient the unit antenna toward the WAAS satellite shown in the skyview. To learn more about the WAAS System, refer to the Federal Aviation Administration Web site (http://gps.faa.gov/). Because the Rino 120 relies on satellite signals to provide you with navigational guidance, the unit’s view of the sky determines how fast you achieve navigational status. GPS signals do not travel through heavy objects or people. For best results, keep the unit in clear view of the sky. The

UNIT OPERATION > SATELLITE PAGE

WAAS system is only available in the U.S.

Satellite Page using WAAS

Satellite Strength

At least three satellite signals are needed to determine your location; otherwise the unit displays a “Poor Satellite Reception” message with four options:

Use with GPS Off—Select this option if you want GPS off.

New Location—Select this option if you have moved more than 600 miles (from where you last used the unit).

Rino® 120 Owner’s Manual

69

Page 75
Image 75
Garmin Rino 120 owner manual Waas, Satellite Strength