UNIT OPERATION > RADIO PAGE

To scan or monitor a channel(s):

1.Using the Thumb Stick, highlight the Scan or Monitor button and then press In. Scan starts searching through the available channels.

Monitor opens the channel to listen to any radio transmissions on that channel.

2.To stop using either option, highlight the button again and press the Thumb Stick In.

To setup a Scanlist:

1.Using the Thumb Stick, highlight the Option Menu on-screen button and press In. Highlight Setup Scanlist and press the Thumb Stick In.

2.To add/remove a channel from the list, highlight the channel and press the Thumb Stick In to add/remove the check mark in front of the name. Only channels that are checked are scanned.

To select all channels or clear all channels, select either the Select All or Clear All buttons and press the Thumb Stick In.

3.To begin scanning the codes you selected, highlight the Option Menu and press the Thumb Stick In. Choose Scan Current Codes and press the Thumb Stick In.

Radio Page Option Menu

Scanlist Page

The Radio Page Option Menu provides the following: Setup Radio, Setup Tones, Setup Scanlist, Turn Radio Off/On, and Turn GPS Off/On. Refer to the following pages for explanations of each item in the Radio Page Option Menu.

14

Rino® 120 Owner’s Manual

Page 20
Image 20
Garmin Rino 120 owner manual To scan or monitor a channels, To setup a Scanlist