GarrettCom Magnum 3000 manual Introduction Magnum Port Modules, Product Description, Port Modules

Magnum 3000 Stackable Hubs Installation and User Guide (07/06)

4.0Introduction - Magnum Port Modules

This chapter describes each Port Module (PM), including appearance,

functionality, and status displays.

4.1Inspecting the Package and Product

This section applies only to PMs shipped as separate items, i.e., only to PMs

not factory installed in a Magnum 3000 Stackable Hubs bonus port slot.

Examine the shipping container for obvious damage prior to installing a PM; notify the carrier of any damage which you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included.

This package should contain:

One or more PMs.

Remove the PM(s) from the shipping container. Be sure to keep the shipping container should you need to ship any of the PMs separately at a later date.

In the event there are items missing or damaged contact your supplier. If you need to return the unit, use the original shipping container if possible. Refer to Chapter 5 for specific return procedures.

4.2Product Description, Port Modules

An important feature of the Magnum 3000 Stackable Hubs is the use of

individual Port Modules (PMs) for flexible mixed-media connectivity. The Magnum PMs are compact interface cards designed to support every standard Ethernet media type. Each PM provides one port for connecting one Ethernet segment with its individual connector type and media. There are a total of six Repeater Port Module (RPM) cards, plus a face plate. They are:

RPM-BNC, RPM-AUI, RPM-DTE RPM-FST (or FSC), RPM-SMF, RPM-TP

There are also four different Bridge Port Module (BPM) cards. They are:

BPM-BNC BPM-AUI BPM-TP BPM-FST

Each PM is individually described as follows.

www . GarrettCom . com

22