GarrettCom Magnum 3000 manual Bpm-Aui, Bpm-Fst, Magnum BPM-FST

Magnum BPM-AUI

2

1

1 FWD-X LED

2 FWD-I LED

Standard 15-pin

female AUI

with slide-lock

Magnum 3000 Stackable Hubs Installation and User Guide (07/06)

4.2.9BPM-AUI

This local-bridge module is equipped with a 15 pin female AUI connector and

a slide-lock. It is self-learning and filters and forwards packets at full Ethernet wire speed. It is used to provide segment

isolation from a 10BASE5 (ThickNet) backbone or any AUI segments. A transceiver is required when connecting to a ThickNet segment and the BPM-AUI supports this convention.

The BPM-AUI card is equipped with one FWD-I LED and one

FWD-X LED, which are identical to those of the BPM-BNC (Section 2.2.7).

The RPM-AUI connector supports standard IEEE signals, which are summarized in Table 3.2.2 of Section 3.2.2.

4.2.10BPM-FST

The Magnum BPM-FST is a multi-mode fiber optic local-bridge module

equipped with a dual ST-type connector. It is self-learning and filters and forwards
packets at full Ethernet wire speed. When	10BASE-FL, FOIRL
used for 10BASE-FL segments, this module	ST Connectors
supports fiber optic transmission distances	2	1	FWD-X LED
up to 2000m. For FOIRL applications, it	1	2	FWD-I LED
	3
supports fiber segments of up to 1000m in			LINK LED
		3
length. The BPM-FST includes full
transceiver functionality and does not
require an external
	Magnum BPM-FST

transceiver device. The BPM-FST has three status LEDs. FWD-I and

FWD-X are identical to those of the BPM-BNC (Section 2.2.7). In addition, this module has a GREEN LINK LED, that is always on when the attached fiber link is operational.

www . GarrettCom . com

30