Magnum 3000 Stackable Hubs | Installation and User Guide (07/06) | |
GND: | Terminal for “earth” or ground wire connection to the hub chassis | |
Input: | Two separate sources, each at 120 - 160 VDC | |
Power Consumption: Model 3024 NEBS: 18 watt typical, 30 watts max.
Power Consumption: Model 3012 NEBS: 10 watt typical, 20 watts max.. With the exception of the dual DC input power connections and the power supply, all specifications and configuration options for the Magnum 3000s
C2.0 Magnum 3000 hubs with
The 3000s Hub with the internal
The functionality of the Magnum 3000s unit with the
C3.0 DUAL-SOURCE OPTION, THEORY OF OPERATION
The 
A diode is placed in each of the four
input lines (behind the four external power connection terminals) so that
power from an external source can only flow into the unit. This allows
the unit to operate whenever DC
power is correctly applied to either or both of the two inputs
C4.0 FEATURES AND BENEFITS OF THE DUAL-SOURCE DESIGN
a)The 3000s unit can receive power from either input, “A” or “B”. The hub will normally draw its power from the DC source with the highest voltage at a given time.
b)The 3000s unit will not allow power to flow from a higher voltage input to a lower voltage input, i.e. the two DC power sources are not mixed together by the hub.
c)When one correct DC input is present, the 3000s will receive power if the other DC input is absent, or even if it is connected with reverse polarity or shorted or grounded.
d)Reverse polarity connections, if they should accidentally occur on either input, will not damage the 3000s or power supply internally (nor will it blow the fuse in the internal power supply) because of the blocking action of the diodes. This is true even if one input connection is reversed while the 3000s is operating from the other source.
e)The 3000s will not receive power (and will not work) when both inputs are simultaneously absent or are both incorrectly connected.
www . GarrettCom . com
50
