GarrettCom Magnum 3000 Address IP/ Name, Bootp IP/NAME, Community # Names Manager, Subnetmask IP

Magnum 3000 Stackable Hubs Installation and User Guide (07/06)

From the top menu prompt > , type: C {Cr}.

On the terminal, the prompt will appear: CFG>

The agent configuration menu consists of the following commands:

ADDRESS

BOOTP

COMMUNITY

DISPLAY

GATEWAY

MANAGER

NAMESERVER

SUBNETMASK

EXIT

To see a command selection menu, type: help {Cr}. On the terminal screen, a menu with command lines and the meaning of each command will appear:

A[DDRESS] [ IP/ NAME]		IP address
B[OOTP] [IP/NAME]		Bootp Server
C[OMMUNITY] [# [NAME[S] [MANAGER....]]]		Communities access:
S - Allow Set operations
Managers - list of IP addresses and/or names
D[ISPLAY]	Display whole configuration
E[XIT]		Exit configuration
G[ATEWAY] [# [IP [SUBNETIP [MASKIP]]]]		Gateways
M[ANAGER] [# [IP/NAME [PORT] COMMUNITY]]		Managers
N[AMESERVER] [# [IP/NAME]]		Name Servers
S[UBNETMASK] [IP]		Subnet mask
(end of “terminal screen” illustration)

Command or Function Listing

1.ADDRESS: A[DDRESS] [ IP/ NAME]

The "Address" command is used to define and/or display an agent's IP address.

To set an IP address, type: A [ address value ] {Cr} ( Example: >A 45.9.0.38 {Cr} )

To display the current IP address, type: A{Cr}

2. BOOTP

B[OOTP] [IP/NAME]

Used to define or display the IP address and/or name of your BOOTP server.

To set, type: B [address value/name] {Cr}

( Example: >B 45.9.0.171 )

www . GarrettCom . com

41