Connecting to the port replicator

Connecting to the port replicator

You can attach your notebook to the port replicator while your notebook is off, on, or in Standby mode.

Attaching to the port replicator

To attach your notebook to the port replicator:

1 Connect external devices to the ports on the port replicator.

2 Align the connector holes on the bottom of your notebook with the docking posts on the port replicator.

3 Press down on the notebook until it snaps into place.

Caution

Press down on the outside edges of the notebook. Do not press in the middle or you may damage the LCD screen.

www.gateway.com

259

Page 269
Image 269
Gateway 450 manual Connecting to the port replicator, Attaching to the port replicator, 259