Chapter 16: Using the Gateway 450 Port Replicator

Important

The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly. Follow any on-screen instructions, if necessary.

Disconnecting from the port replicator

You can separate your notebook from the port replicator while your notebook is off or on (not in Standby or Hibernate mode).

To separate your notebook from the port replicator:

1 If your notebook is off, go to Step 2.

-OR-

If your notebook is on and using Windows XP, click Start, then click Undock Computer. The Undock Computer menu item appears in the Start menu only while the notebook is docked.

-OR-

If your notebook is on and using Windows 2000, click Start, then click Eject PC. The Eject PC menu item appears in the Start menu only while the notebook is docked.

260

www.gateway.com

Page 270
Image 270
Gateway 450 manual Disconnecting from the port replicator, To separate your notebook from the port replicator, 260