Connect the AC adapter, then turn on your notebook.

Chapter 8: Managing Power

Recalibrating the battery

If your notebook unexpectedly goes into Standby mode while you are using it but the battery charge is not low, you may need to recalibrate your battery. You should also recalibrate the battery periodically to maintain the accuracy of the battery gauge.

To recalibrate the battery:

1

2 As soon as it starts and you see a startup screen, press F2. The BIOS Setup utility opens.

3 Open the Advanced menu.

4 Highlight Battery Auto Learning, then select Enabled by pressing the spacebar.

5 Open the Exit menu, then highlight Exit Saving Changes and press ENTER. 6 Select Yes, then press ENTER.

The battery recalibration process begins and a screen opens showing you the progress. The entire process will take several hours.

Important

Do not interrupt the battery recalibration process. If recalibration is interrupted, you must start the process over again.

When the recalibration has finished, the message “Press [Esc] key to exit” appears.

7 Press ESC. The battery charge indicator now displays an accurate battery charge. If the battery charge indicator does not show an accurate charge, contact Gateway Technical Support.

142

www.gateway.com

Page 152
Image 152
Gateway 450 manual Recalibrating the battery, To recalibrate the battery, 142