Gateway ALR 7300 manual 110

Error Message	Solutions
Keyboard not detected.	See “The keyboard doesn’t work.” on
	page 94.
	Turn off the system and check the keyboard
	cable.
Keyboard stuck key failure.	Remove any objects that may be resting on
	the keyboard, and then restart the system.
	Check for sticky keys. Clean the keyboard if
	necessary.
Memory errors were	See “Memory errors were detected during
detected while the system	system start up.” on page 89.
powered up.
Memory size error.	Enter BIOS Setup and save the memory
	configuration.
Non-system disk or disk	Eject the diskette and press Enter.
error.	If the diskette is bootable, check it for errors.
Not enough memory.	Close all programs that are not currently in
	use.
Print queue is full.	Wait until the current print job has completed
	before sending another print job.
	If you receive this error often, you need to add
	memory to the printer.
Printer is out of paper.	Add paper to the printer.
	Make certain the printer is online.
Required parameter	Make certain you entered the right command.
missing.	If you are trying to exit MS-DOS to return to
	Windows, type exit and press Enter.
Syntax error.	Make certain you entered the right command.
	If you are trying to exit MS-DOS to return to
	Windows, type exit and press Enter.
Time and date not set.	Enter BIOS Setup to set the system date and
	time.
Write protect error.	Move the write-protection tab over the hole on
	the back of the diskette.

100 Maintaining and Troubleshooting the Gateway ALR 7300 Server