Installing a second processor

The system is compatible with Intel Pentium II Xeon processors.

You can either upgrade the existing Pentium II Xeon processor or install a second processor of the same speed as the original processor.

When adding a processor, order a Pentium II Xeon processor upgrade kit. The kit includes the processor, a heat sink, and aVRM.

It is critical that a heat sink be installed on each Pentium II Xeon processor. The processor overheats and fails if it is not cooled sufficiently. The heat sink provided with the processor on the system provides all necessary cooling for the processor.

For the latest details on the availability of the upgrade kits, contact one of the sources listed in the Assistance Resources document.

To Install a Second Processor

1.Turn off the system and disconnect the power cord.

2.Open the case (“Opening the system” on page 3), observing the static electricity precautions in “Static electricity precautions” on page 2.

3.Remove the lock bar from the processor supports as shown in Figure 11 on page 27.

4.Remove the Terminator Card from the system board (see Figure 14).

30 Maintaining and Troubleshooting the Gateway ALR 7300 Server