Opening the system

Depending on your purpose, you may need to remove only one or all of the system covers. Follow the instructions specific to the cover you wish to remove as indicated in each section.

Removing the side panel

Most of the system components are accessible through the side panel.
To Remove the Side Panel

1.Follow the ESD precautions described in “Static electricity precautions” on page 2.

2.Turn off the system and disconnect the power cord.

3.Remove the two screws that secure the side panel from the back panel of the system. See Figure 1.

Caution!

Turn the system off and disconnect both power cords before proceeding. Installing any component while the power is on may cause permanent damage to the system.

System Access 3