3.Locate the 3.5-inch drive bracket.

4.Disconnect the power and data cables from the back of the drive that you want to replace, noting their location and orientation. (You will reconnect these cables after you install the new drive.)

5.Remove the screws securing the drive bracket to the system chassis, and remove the drive bracket from the chassis. Doing so also removes the 3.5-inch metal filler panel from the front of the drive bracket (see Figure 20).

Figure 20: Removing the 3.5-inch Drive Bracket

6.Remove the screws securing the 3.5-inch drive to the bracket, and then remove the 3.5-inch drive (see Figure 21).

38 Maintaining and Troubleshooting the Gateway ALR 7300 Server