System Time lets you set the system time. Use a twenty-four hour clock in the format HH:MM:SS.

System Date lets you set the system date, using the format MM:DD:YYYY.

Legacy Diskette A: allows you to select the type of diskette drive installed as drive A. The options are 360 kB, 5 ¼”; 1.2 MB, 5 ¼”; 720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; Not installed; and Disabled.

Legacy Diskette B: allows you to select the type of diskette drive installed as drive B. The options are 360 kB, 5 ¼”; 1.2 MB, 5 ¼”; 720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; Not installed; and Disabled.

Primary Master: opens the Primary Master screen to permit you to setup the primary master hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 65.

Primary Slave: opens the Primary Slave screen to permit you to setup the primary slave hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 65.

Secondary Master: opens the Secondary Master screen to permit you to setup the secondary master hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 65.

Secondary Slave: opens the Secondary Slave screen to permit you to setup the secondary slave hard disk drive. Details of this screen are provided in the section “Hard disk drive setup screen” on page 65.

System Memory: shows the amount of base system memory detected.Extended Memory: shows the amount of extended memory detected.

64 Maintaining and Troubleshooting the Gateway ALR 7300 Server