Gateway ALR 7300 To Remove DIMMs, Figure 17: Inserting the DIMM, Figure 18: Releasing the DIMM Socket Clamps, 7.Reconnect the power cord and turn on the system

Caution!

Never try to remove a DIMM without releasing the clamps. You may break the socket, causing serious damage.

Figure 17: Inserting the DIMM

5.Gently press the DIMM into the socket until it is firmly seated. (Inserting the DIMM automatically locks the socket clamps on each end of the DIMM.)

6.Close the case, as described in “Closing the system” on page 8.

7.Reconnect the power cord and turn on the system.

To Remove DIMMs

1.Gently push out the plastic socket clamps on each end of the DIMM. The DIMM should pop up slightly from the socket (see Figure 18).

Figure 18: Releasing the DIMM Socket Clamps

36 Maintaining and Troubleshooting the Gateway ALR 7300 Server