Gateway ALR 7300 Figure 23: Replacing the Drive Bracket, 13.Reconnect the power cord and turn on the system, 12.Close the case, as described in “Closing the system” on page

9.Place the drive bracket in the chassis (see Figure 23). If you are installing a second front-accessible drive, do not reinstall the 3.5-inch metal filler panel when you reinstall the drive bay in the chassis.

Figure 23: Replacing the Drive Bracket10.Secure the drive bracket to the chassis with the screws you removed in Step 5.

11.Connect the power and data cables to the 3.5-inch drive, making sure the cables match their original position. (See drive documentation for proper drive jumper settings and cable orientation.)

12.Close the case, as described in “Closing the system” on page 8.13.Reconnect the power cord and turn on the system.

40 Maintaining and Troubleshooting the Gateway ALR 7300 Server