Gateway ALR 7300 Replacing the bezel, To Replace the Front Bezel, Figure 5: Replacing the Front Bezel, 2.Insert the bezel pegs into the correct holes at the top of the chassis

Replacing the bezel

After installing a 5.25-inch device or replacing the 3.5-inch diskette drive, replace the front bezel before you replace the side panel.

To Replace the Front Bezel

1.Position the bezel to the front of the chassis so that the bezel pegs are aligned with the mount holes on the front of the chassis. See Figure 5.

Figure 5: Replacing the Front Bezel

2.Insert the bezel pegs into the correct holes at the top of the chassis.

3.Swing the bottom of the bezel forward and press the pegs into the correct holes, securing the bezel to the chassis.

4.Secure the bezel with the two screws you removed when removing the bezel.

System Access 9