CHAPTER 2: Setting Up Your Server

www.gateway.com

3Align the slots in the back server rails with the studs on the side of the server, then engage the slots with the studs and slide the rail forward until it stops.

 

 

Back server rail

Stud

Locking screw (installed)

Stud

(installed)

4Align the locking screw holes in the rails with the threaded screw holes in the server, then install one locking screw through the each back server rail.

5Attach one mounting nut to each of the two front cabinet posts where you plan to install the server.

Front cabinet post

Mounting nut

14