
CHAPTER 4: Installing Components | www.gateway.com |
7Lift the locking tab (3) on the back of the tape drive tray, then push the tape drive (4) and tape drive bracket out of the tray.
8Unscrew the four mounting screws (5) holding the tape drive in the tape drive bracket, then lift the tape drive out of the bracket.
9Put the new tape drive into the drive bracket and secure with the four screws you removed previously (if you are installing a new tape drive, the screws and bracket are included with the tape drive installation kit).
10Push the new tape drive and drive bracket into the tape drive tray, then push down the locking tab.
11Insert the media cage into the assembly bay in the chassis.
12Secure the assembly by tightening the thumbscrew you previously loosened.
13Connect the data and power cables to the back of the tape drive.
14Reinstall the large fan cage by following the instructions in “Replacing system fans” on page 46.
15Follow the instructions in “Closing the server case” on page 32.
16Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
17Reconnect all power cords and peripheral device cables, then turn on the server.
36