www.gateway.com | Replacing or adding a processor |
Caution
The heatsink has Thermal Interface Material (TIM) located on the bottom of it. Use caution when you unpack the heat sink so you do not damage the TIM. If you are reusing the original heatsink, make sure that the TIM on the bottom of the heatsink is not damaged. If the TIM is damaged, you should remove the old TIM, then apply new TIM to the bottom of the heatsink.
10Place the heatsink (2) on the installed processor, making sure that the locking tab on the socket goes through the hole in the heatsink.
11Push down the heat sink retaining levers (3) and lock them under the retaining hooks on the heat sink socket.
12 Follow the instructions in “Closing the server case” on page 32.
51