CHAPTER 2: Setting Up Your Server

www.gateway.com

Removing the server from a cabinet

To remove the server from a cabinet:

Warning

Screws are required to support the front of the server. You must support the server while removing the front screws and while sliding the server off the cabinet rails. If the server is not supported, damage to the server or injury may result.

1Remove the thumbscrews through the handles that hold the server in the cabinet.

2While supporting the server, slide the server out from the cabinet.

Starting your server

Caution

When you connect peripheral devices to the server, make sure that your server and devices are turned off and the power cords are unplugged.

Before you start your server for the first time:

Make sure that the server and monitor are plugged into a power outlet or surge protector and that the surge protector (if you are using one) is turned on.

Make sure that all cables are connected securely to the correct ports and jacks on the back of the server.

To start the server:

1Turn on any peripheral devices connected to the server.

2Press the power button (1). The Power LED (2) lights.

18