CHAPTER 4: Installing Components

www.gateway.com

Installing and removing the ROMB battery pack for the mezzanine RAID card

To remove and install a ROMB battery pack for the mezzanine RAID card:

1Follow the instructions in “Preventing static electricity discharge” on page 30. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.

2Follow the instructions in “Opening the server case” on page 31.

3Push the release lever (1), then lift the ROMB battery pack for the mezzanine RAID card (2) out of the chassis.

4Align the new battery with the battery slot, then push the new battery into the slot until it clicks into place.

5Follow the instructions in “Closing the server case” on page 32.

Installing and removing an optional mezzanine board

This server has two types of optional mezzanine boards. They include a

2-channel SAS mezzanine board, and 2-channel SAS mezzanine board with RAID. They are designed to provide extra HDD storage capability with one 160-pin mezzanine board connector. Each type of mezzanine board uses the specific chipset for optimal features and provides expansive storage by connecting with the extra drives.

To install an optional mezzanine board:

1Follow the instructions in “Preventing static electricity discharge” on page 30. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.

2Follow the instructions in “Opening the server case” on page 31.

3Remove the PCI riser assembly by following the instructions in “Installing and removing PCI expansion cards” on page 44.

56