www.gateway.com | Installing and removing drives |
6Remove the diskette drive from the drive tray, then insert the new diskette drive into the drive tray until it snaps into place.
7Push the drive tray with the new diskette drive into the opening in the media cage until it clicks into place.
8Connect the USB cable to the back of the diskette drive.
9Follow the instructions in “Closing the server case” on page 32.
10Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
11Reconnect all power cords and peripheral device cables, then turn on the server.
Filling empty drive bays
Empty drive bays in the server must be filled by empty drive trays. With the bezel removed, install the appropriate carrier, then replace the bezel by snapping it into place on the front of the server. Empty drive carriers for unused drive bays are included with your server.
39