5.Repeat step 5 in Storing a Name and Number in Memory.
6.Press the memory button again to confirm the entry. STORED shows on the display for 2 seconds and the unit returns to standby mode.
NOTE: If the redial number has more than an 24 digits, it cannot be stored in memory. “UNABLE TO STORE” is displayed.
INSERTING A PAUSE IN THE DIALING SEQUENCE
If a pause is needed to wait for a dial tone press the # pause button on the
REVIEWING, CHANGING OR DELETING STORED NUMBERS
TO REVIEW:
1.Make sure the phone is OFF (not in talk mode).
2.Press the memory button, and the display either shows EMPTY or the number of stored records.
MEMORY
STORED 50
3. Press the CID/VOL ( or ) button to review the memories.
MEMORY
317 ‐ 123 ‐ 4567
PETER CHAN
TO CHANGE:
1.Repeat the steps from 1 to 3 in Reviewing, Changing or Deleting Stored Numbers.
2.Press the memory button, the display shows ENTER NAME.
36