GE 25826GE manual Reviewing the Outgoing Announcement, Erasing Your Recorded Outgoing Announcement

NOTE: The outgoing announcement must be 2 seconds or longer to be valid and should not be longer than 2 minutes. Otherwise, the system uses the default announcement.

DEFAULT MAILBOX for incoming messages: mailbox 1.

REVIEWING THE OUTGOING ANNOUNCEMENT

To review the outgoing announcement, press and release the announce button.

ERASING YOUR RECORDED OUTGOING ANNOUNCEMENT

1.To erase your outgoing announcement while listening to it, press and release the delete button. You will hear ANNOUNCEMENT ERASED.

2.To re-record your outgoing announcement from any point, press and hold the announce button. After the tone, say your new outgoing announcement. Release the announce button when you finish.

3.The new outgoing announcement will be announced indicating that the default one is being replaced.

RETURNING TO THE DEFAULT OUTGOING ANNOUNCEMENT

To return to the answerer’s default outgoing announcement after you’ve recorded one:

1.Press and release the announce button to play your outgoing announcement.

2.Press and release the delete button while your outgoing announcement is playing.

3.Your outgoing announcement will stop and be erased, a confirmation tone is emitted.

4.You will hear ANNOUNCEMENT ERASED, and the default announcement is restored.

SETTING THE DAY AND TIME

For each message received, a day/time stamp is added to the message.

Press the day/check button, the unit will announce current time and day (Day/ Hour/ Minute/ (AM/PM)).

46