2. Use the CID/VOL ( or ) arrows to choose the number.
3.Press talk/callback or spk button on the handset and the number dials automatically.
NOTE: If you get a busy signal and want to keep dialing the number, press the redial button to quickly redial the number.
EXIT
Press the exit button on the handset to end an operation, such as TRANSFER or exit the programmable menu.
PAGING
This feature helps you locate a misplaced handset. All handsets must be registered to use the page function. If your handsets are not registered, follow the instructions in the Handset Registration section of this manual.
HANDSET TO HANDSET PAGING
NOTE: For model 25825, you must register an additional handset (model 25802) in order to use this feature.
Make sure the phone is OFF (not in talk mode).
1. Press the int/conf button on the handset.
PAGING
EXTENSION ?
2.Use the
3.To cancel the page, press the *exit button, or press the int/conf button.
PAGING FROM BASE/GROUP PAGING
1.Press the page button on the base. All registered handsets (or the single handset on model 25825) beep for 2 minutes and “PAGING FROM BASE” shows on each handset’s display.
30
