GE 25826GC, 25826GE manual Accessing the Answering System with the Cordless Handset, Memory Full

TIPS: If you access the answering system with any other touch-tone phone, a voice menu guides you through the steps.

ACCESSING THE ANSWERING SYSTEM WITH THE CORDLESS HANDSET

1.Make sure your handset is in standby mode.

2.Press the flash/answer button to access the answering system. The display shows “ANSWERER REMOTE ACCESS”.

3.Follow the voice menu to use the answering system’s remote functions.

4.Press vol + or vol – button during message playback to adjust the volume of earpiece or speaker.

5.At any time, you can press the exit button or the flash/answer button to abort the current operations and return to the standby mode.

ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION

You can access your answering system from any touch-tone phone by entering your 4-digit security code after you hear the outgoing announcement.

1.Dial the phone number to which the answering system is connected.

2.When the answering system answers enter the security code after you hear the tone.

3.Follow the voice menu to use the answering system’s remote functions.

MEMORY FULL

When you access your answering system remotely, and the answering system’s memory is full, the system answers after 10 rings, beeps, and awaits for you to enter the 4-digit security code. You have 10 seconds to enter the security code before the phone disconnects. You should erase some of the old messages so the system can record new messages.

NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering machine, enter your 4-digit security code after you hear the beep.

51