CALLER LIST
NO CALLS
NOTE: Press exit button to return to standby mode.
CID ERRORS
If there is an error in the transmission of information to your phone, ERROR or INCOMPLETE DATA shows in the display. If you are not subscribed to CID service, or it is not working properly, NO DATA shows in the display.
ANSWERING SYSTEM SET UP
This section shows you how to set up your answering machine to receive incoming calls. Answering system setup may only be done at the base.
TURNING THE ANSWERING SYSTEM OFF AND ON
1.Make sure the unit is not in TALK mode.
2.Press the ans on/off button, you will hear “ANSWER ON” or “ANSWER OFF”.
3.The MESSAGES indicator lights when the answering system is on. The indicator and the corresponding mailbox blink when you have new messages in that mailbox.
NOTE: The answering system displays “-
VOICE INSTRUCTIONS
If you need additional assistance, press the review (rew) button while in standby mode and follow the voice instructions.
RECORDING THE OUTGOING ANNOUNCEMENT
Before using your answering system, you should record an outgoing announcement (the announcement caller hear when your answering system answers a call). A customized outgoing announcement can be
44
