GE 60-883-95R Option 7 Downloader Phone Number, Option 8 Phone Lock, Option 9 Downloader Code

Option 7: Downloader Phone Number		Range = 26 Digits (Default = Off)
Lets you program up to a 26-digit phone number for a computer modem for	¾ To program a Downloader Phone Num-
using GE Interlogix CareGard Configurator/Programmer, or delete an exist-		ber:
ing phone number (off).	1.	Press Add.
Use the Add button to enter a * symbol. Use the Delete button to enter a #	2.	Press Option #.
symbol. Use the Test button to enter a pause.	3.	Press 0, then 7.
	4.	Enter the Number using the numbered but-
		tons.
	5.	Press Done.
Option 8: Phone Lock		Range = On/Off (Default = Off)
Prevents resetting of phone/reporting related to Options 3, 4, 6-11 and Util-	¾ To Add or Delete Phone Lock:
ity Access Code 1 when a memory clear is performed (on), or resets all	1.	Press Add or Delete.
options to their default values when a memory clear is performed (off).	2.	Press Option #.
	3.	Press 0, then 8.
	4.	Press Done.
Option 9: Downloader Code		Range = 00000-99999 (Default = 12345)
Lets you set a unique 5-digit code that is required for initiating CareGard	¾ To program a Downloader Code:
Remote Programmer sessions or sets the code to its default (off).	1.	Press Add.
The code must be 5 digits long and can range from 00000 to 99999. The	2.	Press Option #.
Downloader Code must match the downloader access code in the CareGard	3.	Press 0, then 9.
Remote Programmer account to perform downloader sessions.
	4.	Enter a Downloader Code using the num-
Note
		bered buttons.
The Downloader Code should always be changed from the default setting to
avoid competitor theft.	5.	Press Done.
Option 10: Phone Mod 1		Range = 0-3 (Default = 0)
Determines what (content) and how (format) the panel should report through	¾ To program Phone Mod 1:
the primary phone number (Option 3), if one is programmed. Table 2	1.	Press Add.
describes the available settings for Phone Mod 1.	2.	Press Option #.
Note
	3.	Press 1, then 0.
Phone Mod 1 must be set to 0 or 1 for ETL (UL 1635) listed systems.
	4.	Enter a Phone Mod 1 using the numbered
		buttons.
	5.	Press Done.

Table 2: Phone Mod 1 Settings

Setting	Content	Format
0	All	SIA
1	All	Contact ID
2	Alarms Only	SIA
3	Alarms Only	Contact ID

Programming Options 10