GE 60-883-95R System Components, Optional Components, Control Panel, Multi-PurposePanic

System Components

The CareGard® system is composed of the control panel and a multi-purpose panic sensor.

Control Panel

The control panel (60-883-95R) is the processing unit for all functions. It receives signals from panic sensors and reports emergencies through the phone line. Medication reminders and activity timers are scheduled using the control panel and reminders are given through the panel speaker.

When the panel cover is closed, the panel buttons operate the emergency notification system. The user operates the panel by pressing panel buttons. See the CareGard User Instructions for complete operating instructions.

When the panel cover is open, the but- tons are used to program the emergency notification system. The panel can be programmed on-site by the installer or user.

Speaker

Volume

Power

Home/Away

Button

Reset/Status Button

Call Button

Figure 1. Front of the CareGard Panel

Multi-Purpose Panic

The Multi-Purpose Panic Sensor (60-906-95) is a wireless device designed to be used throughout the installation site. The sensor is worn on the wrist, as a pendant, or on a belt. The panel can be programmed to supervise the Wrist Panic.

Optional Components

The usefulness of the CareGard system can be increased by adding the following wireless devices.

The optional Pendant Panic Sensor (60-578)*is a wireless device designed to be used through- out the installation site. The sensor can be worn around the neck with a removable cord (included) or on the user’s belt with an optional leather belt holster. The panel can be pro- grammed to supervise the Pendant Panic.

A Repeater (60-615-10-319.5)*can be added to the CareGard System in order to boost the range of the wireless sensors.

Smoke Alarms (60-848-02-95)*can be added to the CareGard System to provide warning in case of fire.

The optional Carbon Monoxide Alarm (60-652-95)*is used to detect hazardous levels of carbon monoxide.

Freeze Sensors (60-742-95R)*send a signal to the CareGard panel when the temperature drops below a certain level. They can be used to detect a broken furnace or windows left open.

Water Sensors (60-744-95R)* can alert users to a flooding basement or an overflowing bathtub or sink.

Door/Window Sensors (60-670-95R)* can be added to the system and set up to work with the activity timer function of CareGard.

Motion Sensors (60-807-95R)* can be added to the CareGard system and set up to work with the activity timer function of CareGard. Motion sensors detect movement within a certain area. They can be set up to reduce false detections caused by pets.

An Interrogator® 200 Audio Verification Module (60-787)*can be added to the CareGard Sys- tem to expand the range of 2-way voice communication to other rooms or floors of the home.

* Not investigated for use by ETL.

System Components 2