GE 994-0089 user manual Symbol Meaning

GE Energy

•The successful operation of this equipment depends upon proper handling, installation, and operation. Neglecting fundamental installation requirements may lead to personal injury as well as damage to electrical equipment or other property.

•All AC voltage and current terminals are protected from accidental contact by a mechanical safety shield.

•All electronic components within the D400 are susceptible to damage from electrostatic discharge. Observe standard precautions for handling electronic components.

•Hazardous voltages can cause shock, burns or death. To prevent exposure to hazardous voltages, disconnect and lock out all power sources before servicing and removing components.

•If the D400 is used in a manner not specified in this manual, the protection provided by the equipment may be impaired.

Warning Symbols

The following table explains the meaning of warning symbols that may appear on the D400 or in this manual.

Symbol	Meaning
	The relevant circuit is direct current.
	The relevant circuit is alternating current.
!	CAUTION: Refer to the documentation for important operating and
	maintenance instructions. Failure to take or avoid a specified action could
	result in loss of data or physical damage.
	WARNING! Dangerous voltage constituting a risk of electric shock is
	present within the unit. Failure to take or avoid a specific action could
	result in physical harm to the user.
	CAUTION: Class 1M Laser (IEC 60825-1 Safety of laser products)
	CAUTION: Hot surface
	Earth (Ground) Terminal
	Protective Earth Terminal

10994-0089–1.00–2, General