GE JGSP21, JGSP20 Operating The Self-Cleaning Oven, How to Set Oven for Cleaning, Quick Reminder

OPERATING THE SELF-CLEANING OVEN

(continued) —

How to Set Oven for Cleaning

1.Follow steps to prepare the oven for cleaning

2.Close the oven door.

c1CLEAN 3. Press the CLEAN pad.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the word “ON” appears in the display. When the oven heats to a high temperature, the word “LOCK” will appear in the display. It will not be possible to open the oven door until the temperature drops below the lock temperature.

4.Press the INCREASE or DECREASE pad until the desired Clean Time is displayed.

Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.

5. When the LOCK light is off, open the door.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

How to Delay Start of Cleaning

Quick Reminder:

1.Prepare the oven for cleaning.

2.Close the oven door completely.

3.Press the CLEAN pad.

4.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

5.Press the STOP TIME pad.

6.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning make sure the oven clock shows the correct time of day.

For example: Let’s say it’s 7:00 and you want the oven to begin self-cleaning at 9:00 after you’re finished in~he kitchen. Th~ oven is just soiled a normal amount so the normal Clean Time of 3 hours is preferred.

1.Prepare the oven for cleaning.

2.Close the oven door.

nCLEAN 3. Press the CLEAN pad.

4. Press the INCREASE pad. Three hours

A cleaning time is automatically set.

n~ 5. If a longer or shorter Clean Time is desir=d, press the INCREASE or

~DECREASE pad until the desired

v Clean Time is displayed.

6.Press the STOP TIME pad. 6’10:00”

c1STOP appears in the display and “STOP

TIME TIME” flashes.

The control automatically sets the Stop Time by adding the Clean Time to the time of day. In this example, the time of day is 7:00 and the Clean

Time is 3 hours. Adding 3 hours to the time of day ———

equals 10:00.

7.Change the Stop Time from 10:00 to 12:00 by pressing the INCREASE pad until “ 12:()()” appears in the display. The words “DELAY CLEAN” will also appear in the display.

The self-clean cycle will automatically begin at 9:00 and finish at 12:00. The word “ON” will appear in the display at 9:00.

When the oven heats to a high temperature, the word “LOCK” will be displayed. It will not be possible to open the oven door until the temperature drops below the lock temperature.

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.

8. When the LOCK light is off, open the door.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

‘7A