GE JGSP21 Oven Control, Clock And Timer, To Set the Clock, To Set the Timer, To Reset the Timer

OVEN CONTROL, CLOCK AND TIMER

Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Baking or Self-Cleaning cycle.

‘n

To Set the Clock

1.Press the CLOCK pad.

CLOCK

c1

2. Press the INCREASE or DECREASE

A padtoselthetimeof day.

~

Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer

1.Press the TIMER

TIMER ON/OFF pad.

ON/OFF

c1

2.Press the INCREASE or DECREASE pad to set the amount of time on the timer.

The timer will start automatically
.
within a few seconds of releasing
the pad. The timer, as you are u
setting it, will display seconds until
1 minute is reached. Then it will
display minutes and seconds until
60 minutes is reached.
After 60 minutes, it will display
hours (“HR” now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.	—

To Reset the Timer

If “TIMER” is displayed, press the INCREASE or DECREASE pad until the desired time is reached.

If “TIMER” is not displayed, press the TIMER ON/OFF pad first, then follow the instructions above to set the timer.

To Cancel the Timer

Press and hold the TIMER ON/OFF pad until the word “TIMER” disappears from the display.

End of Cycle Tones

The end of cycle tone is 3 short beeps followed by

1 beep that repeats every 6 seconds until you press any operation. If you would like to eliminate the repeating beeps, press and hold the CLEAWOFF pad for 10 seconds.

To return the end of cycle tone to the repeating beeps, press and hold the CLEAR/OFF pad for 10 seconds.

Power Outage

After a power outage, when power is restored the display will flash and time shown will no longer be correct-for example, after a 5-minute power interruption the clock will be 5 minutes slow. The display flashes until the clock is reset. All other functions that were in operation when the power went out will have to be programmed again.

Display Messages

If “door” appears in the display, the oven door is opened and needs to be closed. If “LOCK” appears in the display, the oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if the — door is in the locked position.

12