GE JGSP20, JGSP21 warranty Before a Clean Cycle, Quick Reminder

Models: JGSP20 JGSP21

1 36
Download 36 pages 23.07 Kb
Page 23
Image 23
Before a Clean Cycle

Quick Reminder:

1.Prepare the oven for cleaning.

2.Close the oven door.

3.Press the CLEAN pad.

4.Press the INCREASE or DECREASE pad to set the Clean Time.

Before a Clean Cycle

The range must be completely cool in order to set the self-clean cycle.

We recommend venting with an open window or using a ventilation fan or hood during the first self-clean cycle.

1.Remove the broiler pan, broiler rack, all cookware and any aluminum foil from the oven—they can’t withstand the high cleaning temperatures.

NOTE: The oven shelves may be cleaned in

the self-cleaning oven. However, they will darken, lose their luster and become hard to slide.

2. Wipe Up heavy soil on the oven bottom. If you ~se soap, rinse thoroughly before self-cleaning to prevent staining.

n

I

Area

Area

Openings

Oven door

outside

inside

in door

gasket

gasket

gasket

 

 

3.Clean spatters or soil on the oven front frame and the oven door outside the gasket with a dampened cloth. The oven front frame and the oven door outside the gasket do not get cleaned by the self- clean cycle. On these areas, use detergent and hot water or a soap-filled steel wool pad. Rinse well with a vinegar and water solution. This will help prevent a brown residue from forming when the oven is heated. Buff these areas with a dry cloth. Do not clean the gasket.

Do not use abrasives or oven cleaners. Clean the top, sides and outside front of the oven door with soap and water.

Make sure the oven light bulb cover is in place.

Do not rub or clean the door gasket— the fiberglass material of the gasket has an extremely low resistance to abrasion. An intact and well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Do not let water run down through openings in the top of the door. To help prevent water from getting in these slots when cleaning, open the door as far as it will go.

4.Close the oven door and make sure the oven light is off. If the oven light is not turned off, the life of the bulb will be shortened or it may bum out immediately. The door latches automatically after the clean cycle is set.

Do not use commercial oven cleaners or oven protectors in or near the self-cleaning oven. A combination of any of these products plus the high clean-cycle temperature may damage the porcelain finish of the oven.

(continued next page)

23

Page 23
Image 23
GE JGSP20, JGSP21 warranty Before a Clean Cycle, Quick Reminder