filectric Ignition
Your surface burners are lighted by electric ignition, eliminating the need for standing pilot lights with constantly burning flames.
In case of a power failure, you can light the surface burners on your range with a match. Hold a lighted match to the burner, then turn the knob to the LITE position. Use extreme caution when lighting burners this way.
Surface burners in use when an electrical power failure occurs will continue to operate normally.
Surface Burner Controls
Knobs that turn the surface burners on and off are marked as to which burners they control. The two knobs on the left control the left front and left rear burners. The two knobs on the right control the right front and right rear burners.
Super Burner
On some models, the right front burner is
To Light a Surface Burner
Push the control | After the burner |
knob in and turn it | ignites, turn the |
lunterclockwise to | knob to adjust the |
LITE. You will hear a | tlame size. |
little clicking |
|
| |
the electric spark |
|
igniting the burner. |
|
After Lighting a Burner
Check to be sure the burner you turned on is the one you want to use.
Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.
The lowest setting of the burner has a small flame to provide simmering capability. To simmer foods, set the cooktop control knob to the lower setting that will maintain the desired simmer.
If simmering on one burner and the other burners are turned on, the gas flow of the simmering burner may have to be adjusted.
Be sure the burners and grates are cool before you place your hand, a pot holder, cleaning cloths or other materials on them.
(continued ne.rtpqe)
9
