GE JGSP33 Pmpamtion, ~oring Under the Range, Leveling the Range, How to Remove Packaging Tape

PMPAMTION

~oring Under the Range

Your range, like so many other household items, is heavy and can settle into sofi floor coverings such as cushioned vinyl or car~ting. When moving the range on this type of Il(]oring, it should bc installed on a l/4-inch-thick sheet of plywood (or similar material) as follows: When thefior coven.ng ends at the front of the range, the area that the range will rest on should be built up with plywood to the sume level f)r higher than the floor covering. This will allow the range to be moved for cleaning or servicing.

Leveling the Range

Usc a 1 X“ open-end or adjustable wrench to equally back (Jut the four legs. The tlanges (rims) belf)w the sides of the c{)oktop must be raised above the top of the countertop. Carefully slide the r~nge into its installation space. Observe tha~ it is clearing the countertop. Then place a spirit level or a glass measuring cup partially filled with water on one of the oven shelves to check for levelness. If using a spirit level, take two readings. with the level placed diagonally first in one direction and then the other.

just the four legs curefully. Uvcl the range f~)nt to ,,~ck and side to side. The range legs must rest on the Iloor. The range must not hang f~)m the countertop.

How to Remove Packaging Tape

T() assure no damage is done to the finish of the pruduct. the safest way to remove adhesive left from packaging tape on new appliances is an application of ;l household liquid dishwashing detergent. mineral uil or c(x)king oil. Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from

the chrome trim on range parts. It cannot bc removed if it is baked (In.

Removing Packing Materials

Check yf)ur range to insure all packaging ,materials and protective tape covering are removed frurn areas such as the dour trim, cooktop frame, under burner caps, end caps, etc. before using.

7

—.