.OW to Set Oven for Cleaning
Quick Reminder:
1. Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or DECREASE pti until the desired Clean Time appears.
1!” the oven is too hot and you start to set a clean cycle, the word ● ’OFF* will appeur in the display. Allow additional time for cooling before you try to set the cycle.
1. Follow the directions in the Before a Clean Cycle section.
o2. After closing the dnnr, press the AUTO
AUTO SELF SELF CLEAN pad.
CLEAN
A
3.Press the INCREASE or DECREASE pad until the desired Clean Time is
Q | displayed. | |
A | Clean Time is normally 3 hours. You cart | |
e | change the Clean Tim; to any time between | |
2 and 4 hours. depending on the amount of | ||
v | ||
st)il in your oven. |
The
4.When the LOCK light is off, open the door. NOTE:
● You can find out when the clean cycle
n{~:: will be finished by pressing the STOP TIME pad.
A
●The word “clean” will be displayed, the word “DOOR”’ will fl~sh and oven control will signal if you set the clean cycle and forget to close the oven d(x~r.
●A fan may automatically turn on and off to cool internal purts. This is rx)rmal, and the fan may continue to run after the oven is turned off.
To Stop a Clean Cycle
o1. Press the CLEAWOFF pad.
CLEAR
F
2.When the LOCK light gws ot~, indicating that the oven has cmlti below the h~king tempemture, open the door.
After Self-Cleaning
You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a
a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
If the shelves become hard to slide, wipe the shelf supports with cooking oil.
NOTE: No functions cart be p%grammed before the door automatically unlocks.
(C.t?lttitluetl tlext Ixlgr)
.
