GE JGSP32, JGSP33 Burner Assembly, Burnercap, eBurnerHead, BE SURE ELECTRICAL POWhR IS, The Range

Proper care and cleaning are important so your range	BE SURE ELECTRICAL POWh:R IS
will give you eflicient and satisfactory service. Folltlw	OF1’ BEFORE CI.EANIN(; ANY PARI’ OF
these directions carefully in caring for your range tn	THE RANGE.
assure safe and proper maintenance.

Grate

-Burnercap

!

eBurnerHead

Mixing Tube	!	/Spark Igniter
	I

Burner Wwl

CAUTION: ~ NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.

Burner Assembly

The burner assemblies should be washed regularly and, of course, after spilh)vcrs.

Turn all controls off before removing burner parts.

The electrode of the spark igniter is exposed beyond the surface of the burner bowl. When cleaning the burner bowl, be careful not to snag the electrode of the spark igniter with your cleaning cloth. Damage to the igniter could occur. Be careful not to push in any cooktop controls while cleaning the burner bowk. A slight electrical shock might result which could cause you to knock over hot cookware.

The burner grates. bumcr heads ilnd burner caps can be rcrnovcd for easy cleaning. Rcmoving thcm gives yoU access to the burner buwls. (T(J avoid snagging il cloth un the spark igniter. leave the burner hcuds in pltice when cleaning the burner bowls. Wash burner parts with an all-purpose non-abrasive cleaner tind warm water. Soak stubborn soil. Dry them with a cloth~() not reassemble while wet. If the igniter orifice gets dirty or clogged you may usc a small sewing needle to remove the soil.

Tu reassemble, replace the burner head Iirst. then the burner cap tind last the burner grate.

30