Proper care and cleming are important so your range will give you efficient and satisfactory service. FO11OW these directions carefully in ctig for it to help assure safe and proper maintenance.

BE SURE ELEC~C PO~R IS 0~ BEFORE CLEMG ANY PART OF T~ RANGE.

Myour range is removed for cl-g, servicing or any mmon, A be sure anti-tip device is re-engaged properly when the range is replaced. Fdure to tie tti pre~ution codd resdt in tipping of the range and cause injury.

P,4

m

A

M

How to Remove the Range for Cleaning and Servicing

Follow these steps to remove the range for servicing or cleaning hard to reach surfaces.

1.Shut off the gas supply to the range.

2.Disconnect the electrical supply to the range.

3.Disconnect the gas supply tubing to the range.

4.Slide the range forward to free the range foot from the Anti-Tip bracket. See the kstilation Instructions for the location of the bracket.

5.Reverse these steps to re-instil the range. If the gas line has been disconnected, check for gas leaks after reconnection. See the Initiation kstructions for the gas lead test method.

NO~: A trained technician should make the gas installation, disconnection and re-connection of the gas supply the appliance.

Lift-Up/Off Cooktop

Clean the area under the cooktop often. Built-up soil, especially grease, may catch on fwe.

To make cleaning easier, the cooktop may be Mted up or off.

Be sure M burners are turned off before raising the cooktop. Then remove the grates. Grasp the two front burner wells and hft the cooktop up or off. Be careful of the pilots when the cooktop is up.

After cleaning underneath the cooktop with hot, soapy water and a clean cloth, lower or replace the cooktop. Be careful not to pinch your fingers.

To replace the cooktop if you have removed it, insert tie two tabs at the back of the cooktop into slots at the base of the backguard.

Lower the cooktop into place, applying pressure until the tab on the underside snaps into the catch at the top front center of the range.

19

Page 18 Page 20
Page 19
Image 19
GE JGAS02EN, JMS02PN, JGAS02PN manual How to Remove the Range for Cleaning and Servicing, Lift-Up/Off Cooktop
Page 18 Page 20

JGAS02PN, JGAS02EN, JMS02PN specifications

The GE JMS02PN, JGAS02EN, and JGAS02PN are advanced gas turbine products developed by General Electric, renowned for their application in various energy and industrial sectors. These turbines represent cutting-edge engineering and design, focusing on delivering high efficiency, reliability, and sustainability.

The JMS02PN model is notable for its performance in power generation applications. With a significant output capacity, it is designed to operate efficiently across a wide range of conditions. Its advanced aerodynamics and combustion technologies allow for reduced emissions while maximizing fuel efficiency. The turbine also features a sophisticated control system that optimizes performance in real-time, ensuring that it can adapt to varying load demands.

Moving on to the JGAS02EN model, this turbine is engineered for enhanced environmental performance. It incorporates GE’s innovative dry low NOx combustion technology, which minimizes nitrogen oxide emissions, making it compliant with stringent environmental regulations. The JGAS02EN is suitable for both industrial and commercial applications due to its flexibility and scalability, allowing users to implement it in diverse operational contexts.

Similarly, the JGAS02PN shares several characteristics with the JGAS02EN but is tailored for specific industrial needs. The JGAS02PN is designed to operate in more challenging environments, offering exceptional durability and long service intervals. This model features advanced materials and coatings that withstand high temperatures and corrosive conditions, ensuring reliability and longevity in operation.

All three models leverage advanced technologies such as digital twin simulations and predictive maintenance capabilities, enabling operators to monitor performance accurately and perform proactive interventions. This technology ensures not only efficiency but also a significant reduction in downtime, leading to lower operational costs.

In summary, the GE JMS02PN, JGAS02EN, and JGAS02PN turbines exemplify the pinnacle of gas turbine technology. They are designed to meet the demands of today's energy landscape, emphasizing performance, sustainability, and adaptability. With their innovative features and robust construction, these turbines are set to play a pivotal role in the future of power generation and industrial applications. Whether aiming for high efficiency, lower emissions, or superior durability, these models offer unparalleled solutions for modern energy challenges.
Top Page Image Contents