2 Remove the top grille by taking out the screw that holds it in place.
3 Next, remove the single screw located above the door near the center of the oven that secures the light housing.
Replace the burned-out bulb with a 40-watt incandescent bulb (WB02X4253), available from your GE supplier.
To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.
1
Replace with 40-watt incandescent bulbs. Order WB02X4253
from your GE supplier. High-intensity40-watt bulbs (40S11N/1), available in supermarkets and hardware stores, may also be used for replacements.
4 Raise light compartment cover and replace the
screw. Connect electrical power to the oven.
Oven Light
Remove screw
breaker panel or pull the plug.
2 Remove the screw on the right side of the light compartment cover and lower the cover until it stops.
3 Be sure the bulb(s) to be replaced are cool before removing. Break the adhesive seal by gently unscrewing the bulb(s).
To replace combination cooktop light/night light, first disconnect the power at the main fuse or circuit
1
About light bulb replacement.
Cooktop Light/Night Light

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service

46

Page 46
Image 46
GE JVM1190 owner manual Operating Instructions