Installation Instructions

1PROVIDE ADEQUATE GAS SUPPLY

Your range is designed to operate at a pressure of 5of water column on natural gas or, if designed for LP gas (propane or butane), 10of water column.

Make sure you are supplying your range with the type of gas for which it is designed.

This range is convertible for use on natural or propane gas. If you decide to use this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range on that gas.

For proper operation, the pressure of natural gas supplied to the regulator must be between 5and 13of water column.

For LP gas, the pressure supplied must be between 10and 13of water column.

When checking for proper operation of the regulator, the inlet pressure must be at least 1greater than the operating (manifold) pressure as given above.

The pressure regulator located at the inlet of the range manifold must remain in the supply line regardless of whether natural or LP gas is being used.

A flexible metal appliance connector used to connect the range to the gas supply line should have an I.D. of 1/2and be 5 feet in length for ease of installation. In Canada, flexible connectors must be single wall metal connectors no longer than 6 feet in length.

2CONNECT THE RANGE TO GAS

Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hook-up has been completed. Don’t forget to relight the pilot on other gas appliances when you turn the gas back on.

Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector is recommended unless local codes require a hard-piped connection.

Never use an old connector when installing a new range. If the hard piping method is used, you must carefully align the pipe; the range cannot be moved after the connection is made.

To prevent gas leaks, put pipe joint compound on, or wrap pipe thread tape with Teflon* around, all male (external) pipe threads.

A. Install a manual gas line shut-off valve in the gas line in an easily accessed location outside of the range. Make sure everyone operating the range knows where and how to shut off the gas supply to the range.

B. Install male 1/2flare union adapter to the 1/2NPT internal thread at inlet of regulator. Use a backup wrench on the regulator fitting to avoid damage.

When installing the range from the front, remove the 90° elbow for easier installation.

C. Install male 1/2or 3/4flare union adapter to the NPT internal thread of the manual shut-off valve, taking care to back-up the shut-off valve to keep it from turning.

D. Connect flexible metal appliance connector to the adapter on the range. Position range to permit connection at the shut-off valve.

E. When all connections have been made, make sure

all range controls are in the off position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system.

WARNING: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.

When using test pressures greater than 1/2 psig to pressure test the gas supply system of the residence, disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures of 1/2 psig or less to test the gas supply system, simply isolate the range from the gas supply system by closing the individual shut-off valve.

*Teflon: Registered trademark of DuPont

46

Page 46
Image 46
GE JGBP89, PGB975, PGB918, PGB910, PGB908, PGB916, PGB900, JGBP92 Provide Adequate GAS Supply, Connect the Range to GAS

JGBP92, JGBP89, PGB900, PGB916, PGB908 specifications

The GE Profile series of gas ranges, including the PGB975, PGB918, PGB910, PGB908, and PGB916, showcases advanced cooking technology combined with a sleek design to elevate culinary experiences. These ranges are equipped with innovative features that cater to both amateur cooks and seasoned chefs.

The PGB975 is the flagship model, boasting a powerful 20,000 BTU tri-ring burner, perfect for high-temperature cooking and quick boiling. One of its standout features is the integrated air fryer, which allows users to achieve crispy and delicious meals without the excess oil commonly associated with traditional frying methods. The combination of convection and traditional baking modes further enhances cooking versatility, enabling perfectly baked dishes every time.

The PGB918 offers a similar high-performance experience but adds the convenience of a built-in smart technology interface. With Wi-Fi connectivity, users can control their oven remotely, preheat from anywhere, and receive notifications when cooking is complete. The model’s precision cooking modes ensure that food is cooked to perfection with minimal effort.

On the other hand, the PGB910 is designed for those who prioritize ease of use. Its intuitive control panel simplifies operations, and the large oven capacity accommodates multiple dishes at once. This range features a self-cleaning option, saving time and effort in kitchen maintenance.

The PGB908 is an aesthetic delight, offering a modern take on classic gas cooking. Its sleek design is complemented by a powerful oven performance with even baking technology, ensuring all dishes are cooked uniformly. This model is particularly popular for its seamless integration into contemporary kitchen designs.

Lastly, the PGB916 emphasizes efficiency and quality. It is equipped with advanced temperature management systems, ensuring precise heat distribution across all cooking surfaces. The continuous cast-iron grates facilitate easy movement of pots and pans, while the durable construction ensures longevity and reliability.

Overall, GE Profile ranges combine robust performance with smart features to enhance daily cooking tasks. Their commitment to quality and innovation makes the PGB975, PGB918, PGB910, PGB908, and PGB916 stand out in the competitive landscape of modern kitchen appliances. These ranges not only cater to a variety of culinary needs but also elevate the aesthetics of any kitchen space.