GE ZV541, ZV421 Finalize Installation, Install Supplied Duct Cover And Top Cover

Installation Instructions

STEP 13 INSTALL SUPPLIED DUCT COVER AND TOP COVER

STEP 14 FINALIZE INSTALLATION

Screws D

Install Duct

Cover Screw on Each Side

•Check all lamps to assure tightness in sockets.

•Turn power on at the circuit breaker.

•Refer to the Owner’s Manual for operating and cleaning instructions.

•Install the supplied 2-piece duct cover over the support frame (if using supplied frame). Snap ends together.

•Secure duct covers to support frame with 2 Screws D.

•For a more finished appearance, a top cover is supplied and should be installed whenever the top of the hood is visible.

TIP: Place pieces
of tape over ends
of the cover to
prevent scratching	Tape	Tabs
the duct cover.
Remove tape
before installing
screws.

•Engage tabs into slots on each side at the top of the hood. The covers should lay flat in the impression on top of the hood.

Top Cover

Screws C	Install Screws
	Front and Back

•Install 2 Screws C to secure the cover to the hood at the front and back.

18