REMOVING THE FREEZER DRAWER (on some models)
The freezer drawer can be removed, if needed, to fit through tight areas.
Read these instructions completely and carefully.
AOpen the freezer drawer until it stops.
BThe freezer basket rests on a frame inside the freezer drawer. Lift the basket up at the back.
CLift the front up and lift the entire basket up and out of the drawer.
A
ARemove the Phillips head screw on each side of the railing.
DO NOT remove the hex head screws from the rail assemblies.
DO NOT remove hex head screws
Phillips Screw
DO NOT remove hex head screws
BLift up on both sides of the freezer drawer handle to separate the drawer railings from the rail assemblies.
CSet the drawer front on a non- scratching surface.
DPush the rail assemblies back into locking position.
Rail
Assembly Drawer
Assembly
If, after removing the freezer drawer and refrigerator door, the refrigerator will still not fit through a doorway, the leveling leg brackets can be removed.
ARemove the base grille by grasping it at the bottom and pulling it straight out.
BRemove both brackets with a 3/8″ hex head driver.
22