GE Monogram 22, 20 Reversing the Door Swing, Important Notes, Tools YOU will Need

Installation Instructions

REVERSING THE DOOR SWING

IMPORTANT NOTES

When reversing the door swing:

NOTE: Door swing is not reversible on some stainless steel models.

•Read the instructions all the way through before starting.

•Handle parts carefully to avoid scratching paint.

•Set screws down by their related parts to avoid using them in the wrong places.

•Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right.

•Once door swing is finalized, ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side. NOTE: If necessary call Customer Service for a replacement badge.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy compartment.

TOOLS YOU WILL NEED
Adjustable Wrench	3/8″ and 10 mm Socket
	Drivers
Masking Tape	Putty Knife or
	Thin-blade Screwdriver
Phillips Screwdriver
	24

1REMOVE THE REFRIGERATOR DOOR

ATape the door shut with masking tape.

BRemove the hinge cover on top of the refrigerator door by squeezing it and pulling it up.

CUsing a 3/8″ or 10 mm socket driver, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.

Hinge Cover

Top Hinge

DRemove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin.

ESet the door on a non-scratching surface with the inside up.