Installation Instructions
AOn models with a freezer door, tape the door shut with masking tape.
BUsing an adjustable wrench, remove the center hinge pin.
ARemove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin.
NOTE: There is a plastic washer between the hinge and the top of the freezer door. Do not lose.
BSet the door on a
Using a 3/8″ or 10 mm socket driver and Phillips head screwdriver, remove the bolts and screws securing the center hinge to the cabinet. Set hinge, bolts, screws, washer (on freezer door models) and hinge pin aside.
ARemove the base grille by grasping it at the bottom and pulling it straight out.
BUsing a 3/8″ or 10 mm socket driver, remove the screws securing the bottom hinge bracket to the cabinet.
CUsing an adjustable wrench, remove the hinge pin and washer(s) from the right side of the bracket and install on the left.
Washer(s)
DUsing a 3/8″ or 10 mm socket driver, remove the leveling leg bracket from the bottom left side of the cabinet and install it on the right side.
Left Side |
| Right Side |
25